Gen 2 xB xGangster Visor 08-12

Let's do it OLD SKOOOL with a Modern TWIST! From Scionpro's own Dare 2B Different Motorwerks LLC..... the xG Front Visor for your 2008 xB . Made in the U.S.A. of high quality hand laid FRP (fiber reinforced plastic) or high quality tight weave carbon fiber. Each unit is produced to Scionpro's stringent quality standards. As you have come to expect from Scionpro. We are using the best U.V. stabilized resins, ultra smoooooth gel coat and a ready to paint black primer. No modifications are necessary! Just paint and install. Saving you lots of money at the body shop. Carbon fiber parts are ready to mount no prep. (PROFESSIONAL INSTALLATION RECOMMENDED) This visor comes with a one year warranty for defects in material or workmanship to the original owner. Carbon Fiber is warranted for five years to the original owner. (see pdf for full warranty disclaimer) Fed Ex Flat rate National shipping. Hawaii,Canada,Alaska,Puerto Rico orders will incur additional charges.



MOUNTING INSTRUCTIONS VERY IMPORTANT:Scionpro requires use of :Plastic Panel 35 (7770) 35 minutes working time 1.5 hours- 2 hours set Pre align spoiler to body and set line with painters tape. Scuff all three mounting point areas and clean with prepsol. Generously fill the space between the 3m tape on all three mounting points. Lay spoiler in place and weight down. Allow the car to sit in the sun for at least 24 hours before driving. This application will not allow the removal of the unit without damaging it but will stay on the car tested to 90mph steady. This part will create some wind noise and at high speed in excess of 75 mph can flutter a bit. Wiper Blade must be replaced to be one inch shorter with this unit. PLEASE SEE DOCUMENTS BELOW FOR IMPORTANT PLYOGRIP INSTRUCTIONS.